Exit Without Saving; Flash Update Procedure - Zotac nForce 630i - ITX User Manual

NForce 610i/630i-ITX series Motherboard

Exit Without Saving

Press <Enter> on this item and press the <Y> key. This exits the BIOS Setup without
saving the changes made in BIOS Setup to the CMOS. Press <N> or <Esc> to return
to the BIOS Setup Main Menu.

FLASH Update Procedure

The program AWDFLASH.EXE is included on the driver CD (D:\Utility\AWDFLASH.
EXE). Please follow the recommended procedure to update the flash BIOS, as listed
below.
1. Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or
downloaded) and the utility program AWDFLASH.EXE to the diskette.
2. Allow the PC system to boot from the DOS diskette.
3. At the DOS prompt, type AWDFLASH<ENTER>
4. Enter the file name of the new BIOS.
5. The question: "Do you want to save BIOS (Y/N)?" is displayed.
Press "N" if there is no need to save the existing BIOS.
Press "Y" if a backup copy of the existing BIOS is needed.
(A file name has to be assigned to the existing BIOS binary file.)
6. The message : "Press "Y" to program or "N" to exit" is displayed. Type "Y"<ENTER>
7. Wait until the flash-update is completed.
8. Restart the PC.
Warning :- Do not turn off or RESET the computer during the flash process.
- If you are not sure how to upgrade the BIOS, please take your computer
to an Authorized Service Center and have a trained technician do the
work for you.