Save & Exit Setup - Zotac nForce 630i - ITX User Manual

The BIOS Setup program allows you to specify two separate passwords:
v Supervisor Password
When a system password is set and the Password Check item in Advanced
BIOS Features is set to Setup, you must enter the supervisor password for enter-
ing BIOS Setup and making BIOS changes.
When the Password Check item is set to System, you must enter the supervisor
password (or user password) at system startup and when entering BIOS Setup.
v User Password
When the Password Check item is set to System, you must enter the supervisor
password (or user password) at system startup to continue system boot. In BIOS
Setup, you must enter the supervisor password if you wish to make changes to
BIOS settings. The user password only allows you to view the BIOS settings but
not to make changes.
To clear the password, press <Enter> on the password item and when requested
for the password, press <Enter> again. The message "PASSWORD DISABLED" will
appear, indicating the password has been cancelled.
Save & Exit Setup
Press <Enter> on this item and press the <Y> key. This saves the changes to the
CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS
Setup Main Menu.
Configuring the BIOS
7