Table of Contents
Advertisement
Front Pannel Audio Header-FP_S
The audio connector supports HD audio standard and provides two kinds of audio
output choices: the Front Audio, the Rear Audio. The front Audio supports re-tasking
function.
FP_S-Pin Definition
PIN
Assignment
1
MIC2(L)
2
GND
3
MIC(R)
4
-ACZ-DET
5
Front Audio(R)
Note:
In order to utilize the front audio header, your chassis must have front audio
connector. Also please make sure the pin assignment on the cable is the
same as the pin assignment on the mainboard header. To find out if the
chassis you are buying supports a front audio connector, please contract
your dealer.
Serial-ATA (SATA) Connectors(Optional)
The Serial ATA II connector is used to connect the Serial ATA II device to
the motherboard.These connectors support the thin Serial ATA II cables
for primary storage devices.The current Serial ATA II interface allows up
to 3Gb/s data transfer rate.
There are two serial ATA connectors on the motherboard that support
AHCI and RAID configurations.
SATA-Pin Definition
Pin
Signal
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
PIN
Assignment
6
Reserved
7
FAVDIO-JD
8
Key(No pin)
9
Front Audio(L)
10
Reserved
Hardware Installation
121
121
+
120
120
240
240
Advertisement
Table of Contents
