Halt On; Memory - Zotac nForce 630i - ITX User Manual

NForce 610i/630i-ITX series Motherboard

Halt On

Halt On determines whether or not the computer stops if an error is detected during
power on. Use the Page Up and Page Down keys to scroll through the options or
press Enter to display the Halt On sub-menu. Use the # $ arrow keys to position
the selector in the option you choose. Press Enter to accept the changes and return
to the Standard CMOS Features menu.
q All Errors
Whenever the BIOS detects a nonfatal error, the system stops and prompts you.
q No Errors
System boot does not stop for any detected errors.
q All, But Keyboard
System boot does not stop for keyboard errors, but does stop for all other errors.
q All, But Diskette
The system boot does not stop for a diskette error but will stop for all other errors.
q All, But Disk/Key
The system boot does not stop for a diskette or keyboard error but will stop for all
other errors.

Memory

These settings are display-only values that are determined by the BIOS POST
(Power-On Self Test).
q Base Memory
BIOS POST determines the amount of base (or conventional) memory installed
in the system.
q Extended Memory
BIOS determines how much extended memory is present during the POST.
q Total Memory
This value represents the total memory of the system.