Power Management Setup Menu - Zotac nForce 610i-ITX User Manual

NForce 610i/630i-ITX series Motherboard

Power Management Setup Menu

Select Power Management Setup from the CMOS Setup Utility menu and press
Enter to display the Power Management Setup menu.
ACPI Function
q
This function on the Power Management Setup menu allows you to enable or
disable the ACPI function.
Power Management
q
Use this option to set the mode for Power Management
Video Off Method
q
Use this option to set a Method for Video off.
HDD Power Down
q
Use this option to enable or disable a mode of HDD Power down.
Soft-Off by PBNT
q
This function on the Power Management Setup menu allows you to set Soft-Off
by PBNT to [Instant-Off] or [Delay 4 Sec].
PowerOn after PWR-fail
q
Use this option to change its setting
USB Resume from Soft-off
q
This function on the Power Management Setup menu allows you to enable or
disable the Power-on by Ring function. Allows the system to be awakened from
an ACPI sleep stare by a Wake-Up signal from a modem that supports Wake-Up
function.
USB Resume From Soft-off
q
Use this option to disable or enable the function of USB Resume From Soft-off.
Power-On by Alarm
q
Determines whether to power on the system at a desired time. If enable set the
date and time as following:
v Date(of Month) Alarm: Tarn on the system at a specific time on each day or
on a specific day in a month.
v Time(hh:mm:ss) Alarm: Set the time at which the system will be Powered
on automatically.
0