Standard Cmos Features Menu; Ide Channel; Video; Drive A - Zotac GeForce 9300-ITX User Manual

Date and Time
Using the arrow keys, position the cursor over the month, day, and year. Use the Page
Up and Page Down keys to scroll through dates and times. Note that the weekday
(Sun through Sat) cannot be changed. This field changes to correspond to the date you
enter. Note that the hour value is shown in a 24-hour clock format. Time is represented
as hour : minute : second.

IDE Channel

Use these functions to detect and configure the individual IDE channels. Select a
channel and press Enter to display the IDE sub-menu.
Press Enter to auto-detect IDE channels in the system. Once the channel is detected,
the values for Capacity, Cylinder, Head, Precomp, Landing Zone, and Sector are
automatically filled in.
q None
There is no HDD installed or set.
q Auto
The system can auto-detect the hard disk when booting up.
q Manual
When you set the channel to [Manual] and change Access Mode to [CHS],
you can then enter the number of cylinders, heads, Precomp, landing zone, and
sector.

Video

Use this option to choose the mode of Video, as EGA/VGA, CGA 40, CGA 80,
MONO.

Drive A

The Drive A option allows you to select the kind of FDD to install.

Halt On

Halt On determines whether or not the computer stops if an error is detected during
power on. Use the Page Up and Page Down keys to scroll through the options or
press Enter to display the Halt On sub-menu. Use the # $ arrow keys to position
the selector in the option you choose. Press Enter to accept the changes and return
to the Standard CMOS Features menu.
q All Errors
Whenever the BIOS detects a nonfatal error, the system stops and prompts you.
q No Errors
System boot does not stop for any detected errors.
q All, But Keyboard
System boot does not stop for keyboard errors, but does stop for all other errors.
q All, But Diskette
The system boot does not stop for a diskette error but will stop for all other errors.
Configuring the BIOS