Usb Header-Fp_U1; Front Pannel Audio Header-Fp_S1 - Zotac NM10-ITX WiFi User Manual

USB Header-FP_U1

This motherboard contains six USB 2.0 ports that are exposed on the rear panel of the chassis.
The motherboard also contains one 10-pin internal header onboard.
Note: Secure the bracket to either the front or rear panel of your chassis (not all chassis
are equipped with the front panel option).
FP_U1-Pin Definition
PIN Assignment
1 VCC
3 USBP0-
5 USBP0+
7 GND
9 KEY
Front Panel Audio Header-FP_S1
The audio connector supports HD audio standard and
provides two kinds of audio output choices: the Front
Audio, the Rear Audio. The front Audio supports re-task-
ing function.
FP_S1-Pin Definition
PIN Assignment
1 MIC2(L)
3 MIC(R)
5 Front Audio(R)
7 FAVDIO-JD
9 Front Audio(L)
Note:
In order to utilize the front audio header, your chassis must have front audio connector.
Also please make sure the pin assignment on the cable is the same as the pin
assignment on the mainboard header. To find out if the chassis you are buying supports
a front audio connector, please contract your dealer.
PIN Assignment
2 VCC
4 USBP1-
6 USBP1+
8 GND
10 NC
PIN Assignment
2 GND
4 -ACZ-DET
6 Reserved
8 Key(No pin)
10 Reserved
FP_U1
9 1
10 2
10 9
2 1
FP_S1
Hardware Installation
15