Network Settings - Altigen Alti-IP 600H Administration Manual

Current
System>Current AW
AltiWare
Hour Offset
System>Hour Offset
TFTP Server
System>TFTP Server
{Save TFTP Server IP
Address}
Boot
System>Boot
Download
Download
Emergency
System>Emergency
Number
Num
Emergency
System>Emergency
Gateway
GW
Version
System>Version
Information Info {Read only, version
information}

Network Settings

Setting
Enable DHCP
Network>Enable
DHCP
Alti-IP 600H Manual
Menu Path {Sub Menu}
24
Displays the current AltiWare
server's IP address assigned to the
phone
Sets the time offset from the
AltiWare server's time.
Sets the TFTP server IP address for
updating firmware.
After firmware image upgrade,
submenu changes to {No}. Used
mainly for upgrading or
troubleshooting. On the next boot,
the phone will download the new
firmware from the TFTP server, if
set to [YES].
Note: Make sure to launch
TFTP32.exe.
When downloading, the
phone key pad is disabled.
Sets the IP phone's emergency
number
Sets the IP phone's emergency
gateway IP address
Indicates the version number of the
IP Phone.
Description
Set YES or NO to indicate whether
Dynamic Host Configuration
Protocol (DHCP) is being used by the
IP phone to retrieve new IP address
upon boot up.