Page 1
User’s Manual WS-208LF30SS WS-208LF36SS NOTE: This unit does not support ducted operation. For ducted operation, please refer to model WS208L30SS or WS208L36SS For residential and indoor use only Please read this operation manual thoroughly before using your range hood. Store it in a safe location for...
SAFETY INFORMATION SAFETY INFORMATION TO REDUCE THE RISK OF A FIRE, ELECTRICAL SHOCK, AND/OR INJURY OBSERVE THE FOLLOWING: Unit is intended for indoor residential use only. If you should have questions, contact the manufacturer at the address or telephone number listed in the warranty.
Page 4
SAFETY INFORMATION TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: Regardless of heat level, never leave any surface materials unattended while operating an open flame. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
PREPARATION PREPARATION BEFORE YOU START Be sure you have all the content of your purchase and required tools for this installation. Installation may take at least 1 to 2 hours from start to finish. Plan to use as few elbows or turns as possible for more efficient air flow. (DUCTED MODEL ONLY) Collar size may need to be increased if utilizing a long duct run.
Page 8
PREPARATION For cabinet with recessed-bottom, use (2) 3” x 12” or 15” wood strips on both sides to balance the recession. Use (4) 1-1/4” long flat head screws to secure the wood strips to cabinet. (Fig. 1c) HOOD Inspect for any sign of defect or damage. (ie. scratches, dents, loose seams, etc.) Power up the unit to make sure it is working properly.
INSTALLATION INSTALLATION 1. DUCTLESS INSTALLATION Make sure all preparation steps are completed. Feed the wires coming out of the hood through the bottom of the cabinet. Lift the unit up flesh against the wall and the bottom of the cabinet. Using the screws and washers provided, insert into each of the 4 keyhole openings (2 on each side) and tightly secure the unit against the bottom of the cabinet.
CLEANING & MAINTENANCE CLEANING & MAINTENANCE WARNING!!! To prevent the possibility of a fire and explosion, do not use flammable liquids or solvents to clean the unit or any of its parts. Check to make sure all power sources are disconnected before servicing or taking unit apart for cleaning.
TROUBLESHOOTING TROUBLESHOOTING WARNING!!! Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit. Serious injury or death may occur if safety precautions are not followed. WS208L/LF Series Light Issue (Both not New Transformer replacement is required...
PART LIST / REPLACEMENT PARTS PART LIST / REPLACEMENT PARTS Description Description Hood body Air chamber LED light Motor LED transformer Teflon fan impeller Control switch Oil funnel Inner bracket (3) Charcoal filters Capacitor (2) Charcoal filters / (1) filler...
For a period of one (1) year from the date of purchase, if the product is Labor: determined to be defective, Windster will repair or replace the product, at its option, at no charge. After the warranty period, customer must pay for all labor charges. During the "labor"...
Page 15
WARRANTY / CONTACT US WHAT IS NOT COVERED BY MANUFACTURE WARRANTY Damages resulting from any of the following: Improper installation or maintenance Any repair, modification, alteration or adjustment not authorized by the manufacturer or an authorized service dealer Misuse and/or accidents Incorrect electric current, voltage or power supply Improper setting of any control (Pressing multiple selections at the same time)