Kyocera TASKalfa 650c Operator's Manual page 26

2 GA-1310 SPECIFIC FUNCTIONS
6
Press [SCAN].
 To scan 2-sided documents or change settings such as Color Mode and Resolution, press [COMMON
SETTING]. For details, refer to the Scanning Guide.
 You can preview your scans by pressing [PREVIEW], followed by [SCAN]. For details, refer to the
Scanning Guide.
 You can set another scan function by pressing [e-FILING]. (Dual Agents)
For details, refer to the Scanning Guide.
7
If the screen below appears, place another original on the original glass and press
[SCAN] or the [START] button to continue scanning. To finish the job, press [JOB
FINISH], followed by the [FUNCTION CLEAR] button.
 The above screen is not displayed under the following conditions:
- A scan preview is displayed.
 To cancel the operation, press [JOB CANCEL].
 To change the common settings, press [COMMON SETTING]. For details, refer to the Scanning Guide.
 When the equipment has scanned more than 1000 pages in a job, the "The number of originals exceeds the
limits. Will you save stored originals?" message appears. If you want to save the scans, press [YES].
 When the temporary workspace is full on the equipment's hard disk, the "Not enough Work Space to store
originals. Will you save original(s)?" message appears. If you want to save the scans, press [YES]. The
available workspace can be viewed on the COMMAND CENTER [Device] tab.
 If the number of jobs waiting to store scans in the equipment's hard disk exceeds 20, a message appears to
indicate that the equipment's memory is full. In this case, wait a while until memory becomes available again
or delete unnecessary jobs from [JOB STATUS].
For instructions on how to view the scan job status, refer to the Scanning Guide.
 Scan to SMB/FTP/OTHER
This GA-1310 specific scan menu allows you to send and store scans to the following destinations:
 SCAN TO SMB — to a specified network folder
24 Operations from the Control Panel