1 RESTRICTIONS
COMMAND CENTER ADMIN Mode
The same series machine with the GA-1310 controller attached has several restrictions in the following COMMAND
CENTER ADMIN mode operations:
P.14 "Setting up from COMMAND CENTER"
P.16 "Maintaining from COMMAND CENTER"
P.17 "Registering from COMMAND CENTER"
Setting up from COMMAND CENTER
Setup page
The following menus are unavailable when the controller is connected to the equipment:
Save as file
Printer
ICC Profile
Machine without the controller
For details on the Setup page, refer to the COMMAND CENTER Guide.
Setting up Network settings
The following provided for the Network submenu are unavailable when the controller is connected to the equipment:
TCP/IP
IPX/SPX
DDNS Session
SNTP Service
Web Services Setting
14
COMMAND CENTER ADMIN Mode
Filtering
AppleTalk
SMB Session
FTP Client
LLTD Session
Machine with the controller
IPv6
Bonjour
NetWare Session
SLP Session
IP Security