Maintaining From Command Center - Kyocera TASKalfa 650c Operator's Manual

1 RESTRICTIONS
For details on the Network settings screen, refer to the COMMAND CENTER Guide.
 Setting up Print Service settings
The following related to Print Service cannot be used when the controller is connected to the equipment:
 Raw TCP Print
 LPD Print
 IPP Print
 FTP Print
 NetWare Print
Machine without the controller
To learn more about Email Print, refer to the COMMAND CENTER Guide.
 Maintaining from COMMAND CENTER
The following menus are unavailable when the controller is connected to the equipment:
 Upload Software
 Remove Software
16 COMMAND CENTER ADMIN Mode
Machine with the controller