Plugging In The Printer - Epson Stylus 1520 User Manual

Plugging in the Printer

1. Make sure the printer's
off when the surface of the button is even with the button
protectors beside the button, as shown.
2. Check the label on the back of the printer to make sure the
voltage required by the printer matches that of the electrical
outlet you will be plugging it into. Also, make sure that you
have the correct power cable for your power source.
c
3. If the power cord is not attached to the printer, connect it to
the AC inlet on the back of the printer.
4. Plug the power cord into a properly grounded electrical
outlet.
2-6
Getting Started
Caution:
It is not possible to change the printer's voltage. If the
rated voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the
power cord.
2
Operate button is turned off. It is