Attaching The Paper Support; Plugging In The Printer - Epson STYLUS COLOR 900 Setup And Daily Use

Attaching the Paper Support

Insert the paper support into the slots at the rear of the printer.

Plugging in the Printer

1. Make sure that the printer is turned off. It is off when the
2. Check the label on the back of the printer to make sure the
3. If the power cord is not attached to the printer, connect it to
4. Plug the power cord into a properly grounded electrical
12
Downloaded from:
P power light is off.
voltage required by the printer matches that of the electrical
outlet you will be plugging it into. Also, make sure that you
have the correct power cable for your power source.
c
Caution:
It is not possible to change the printer's voltage. If the rated
voltage and your outlet voltage do not match, contact your
dealer for assistance. Do not plug in the power cord.
the AC inlet on the back of the printer.
outlet.
http://www.usersmanualguide.com/