Epson Stylus 1520 User Manual page 141

c
Caution:
Do not use the knob on the left side of the printer to adjust the
tear-off position. Otherwise, you may damage the printer or
cause it to lose the top-of-form position.
Note:
When the auto tear-off feature is on, the printer advances the
paper perforation to the tear-off position automatically after you
have finished printing a page. For more information on the auto
tear-off feature, see "Using the Default-Setting Mode" in
Chapter 8.
The setting you make remains in effect until you change it again,
even if you turn off the printer.
c
Caution:
Never use the tear-off feature with labels. When fed backward,
labels may come off the backing and jam the printer. When you
use labels, always turn off the auto tear-off setting using the
default-setting mode.
To adjust the tear-off position, follow the steps below.
1. Make sure the printer is on and the paper is in the current
tear-off position.
2. Press the Micro Adjust
press Micro Adjust
button as many times as necessary until the perforation is
positioned correctly.)
3. Tear off any printed pages.
Note:
The printer has a minimum and maximum tear-off position, beyond
which the paper stops moving.
,
button to feed paper forward, or
7
to feed paper backward. (Press either
Paper Handling
7
7-17