Epson Stylus 1520 User Manual page 192

Software settings override
those made in the
default-setting mode.
For DOS users:
The Network I/F mode is set
to off.
All the text prints on the same line.
Cause
For DOS users:
Auto line feed is set to off in
the default-setting mode.
An extra blank line prints between each text line.
Cause
For DOS users:
Auto line feed is set to on in
the default-setting mode.
10-14
Troubleshooting
Always try making a setting in your
application first. If that is not possible,
use the printer driver. If that is also
impossible, use the default-setting
mode.
Set the Network I/F mode to on in the
default-setting mode. To enter the
default-setting mode, see "Changing
the default settings" in Chapter 8.
What to do
Make sure that auto line feed is set to
on in the default-setting mode so that
the printer automatically adds a
line-feed code to each carriage return.
See "Using the Default-Setting Mode"
in Chapter 8.
What to do
Make sure that auto line feed is set to
off in the default-setting mode so that
two line-feed signals are not sent. See
"Using the Default-Setting Mode" in
Chapter 8.