Powering On/Off The Projector; Powering On The Projector - NEC PE401H User Manual

 When you first
turn on the projec-
tor, you will get the
Startup menu. This
menu gives you the
opportunity to select
the menu languages.
To select the language,
, ,
use the
, or
button on the
remote control. Select
your language. Refer
to Language on page
42.
While the POWER

indicator is blinking
blue in short cycles,
the power cannot be
turned off by using the
power button.
(*)When "Power-
Saving" is selected for
"Standby Mode",the
Power LED will turn
red; when "Normal" is
selected for "Standby
Mode", the Power LED
will turn orange.
Turn on the projector
first and then the signal
sources.

Powering On/Off the Projector

Powering On the Projector

1. Slide the lens cover. 
2. Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red. (*)
3. Turn on the projector by pressing "POWER" on the remote
control or on the control panel.  The Power indicator
will flash blue.
played. and the Power indicator will turn steady blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
 I f you connect multiple sources at the same time, use the
"SOURCE" button on the control panel or use "COMPUTER
1", "VIDEO", "HDMI" on the remote control to switch in-
puts.
1
Lens Cover
2
Power
Installation
The startup screen (NEC logo) will be dis-
or
27 ... English