Powering On/Off The Projector; Powering On The Projector - NEC V302X User Manual

 When you first
turn on the projec-
tor, you will get the
Startup menu. This
menu gives you the
opportunity to select
the menu languages.
To select the language,
, ,
use the
, or
button on the
remote control. Select
your language. Please
see the page 53.
While the POWER

indicator is blinking
green in short cycles,
the power cannot be
turned off by using the
power button.
(*)When "Normal" is
selected for "Standby
Mode", the Power LED
indicator will turn
red; when "Network
standby" is selected for
"Standby Mode", the
Power LED indicator
will turn orange.
Turn on the projector
first and then the signal
sources.

Powering On/Off the Projector

Powering On the Projector

1. Securely connect the power cord and signal cable. When
connected, the POWER/STANDBY LED will turn Red or
Orange (*).
2. Turn on the projector by pressing "POWER" on the remote
control or on the control panel. At this moment, the
POWER/STANDBY LED will now turn Green. 
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you will be asked to
select the preferred language and power saving
3. Turn on your source (computer, notebook, video player, etc.)
The projector will detect your source automatically.
 I f you connect multiple sources at the same time, press the
"SOURCE" button on the control panel or direct source keys
on the remote control to switch between inputs.
POWER/STANDBY
1
Installation
mode.
29 ... English