Powering On/Off The Projector; Powering On The Projector - NEC NP100 User Manual

Installation
Turn on the projector
first and then the signal
sources.
English ... 12

Powering On/Off the Projector

Powering On the Projector

1. Ensure that the power cable and signal cable are securely
connected. The Power LED will flash blue.
2. Remove the lens cap. 
3. Turn on the lamp by pressing "Power" on the control panel.
The startup screen (NEC logo) will display and the Power

LED will turn blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
 I f you connect multiple sources at the same time, use the
"Source" on the remote control or use "Computer", "S-Vid-
eo", "Video" on the remote control to switch inputs.
1
Lens Cap
2
Power