Using The Downloadable Software - NEC PE401H User Manual

Hide thumbs Also See for PE401H:
Table of Contents

Advertisement

 When "Computer
IN" is selected for
input, the Virtual
Remote screen or the
toolbar will be dis-
played as well as your
computer screen.
 Use the supplied
computer cable (VGA)
to connect the COM-
PUTER IN connector
directly with the moni-
tor output connector
of the computer to use
Virtual Remote Tool.
Using a switcher or
other cables than the
supplied computer
cable (VGA) may
cause failure in signal
communication.
VGA cable connector:
Pin Nos. 12 and 15 are
required for DDC/CI.
 Virtual Remote
Tool may not work
depending on your
computer's specifica-
tions and version of
graphic adapters or
drivers.
 The projector does
not support the LAN
automatic search fea-
ture of Virtual Remote
Tool. To connect the
projector, register an
IP address manually.

Using the Downloadable Software

Using the Computer Cable (VGA) to Operate the
Projector (Virtual Remote Tool)
Using the utility software "Virtual Remote Tool" that you can
download from our web site (http://www.nec-display.com/
dl/en/index.html), Virtual Remote screen (or toolbar) can be
displayed on your computer screen.
This will help you perform operations such as projector's
power on or off and signal selection via the computer cable
(VGA), serial cable, or LAN connection.
Virtual Remote screen
This section provides an outline of preparation for use of Virtual
Remote Tool.
For information on how to use Virtual Remote Tool, see Help of Vir-
tual Remote Tool. (-> page 19)
• Step 1: Install Virtual Remote Tool on the computer. (-> page 16)
• Step 2: Connect the projector to the computer. (-> page 17)
• Step 3: Start Virtual Remote Tool. (-> page 18)
TIP:
• Virtual Remote Tool can be used with a LAN and a serial connection.
• For update information on Virtual Remote Tool, visit our website:
http://www.nec-display.com/dl/en/index.html
TIP:
• The projector's COMPUTER IN connector supports DDC/CI (Display Data
Channel Command Interface). DDC/CI is a standard interface for bidirec-
tional communication between display/projector and computer.
Introduction
Toolbar
15
... English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np-pe401h

Table of Contents