Replacing The Lamp - NEC PE401H User Manual

Warning: To avoid
burns, allow the
projector to cool for
at least 60 minutes
before you replace
the lamp!

Replacing the lamp

optional lamp NP24LP
The projector will detect the lamp life at 2500 hours in Eco
Mode Off (3300 hours in Eco Mode On). When the "POWER"
LED indicator fl ashes red and the message below displays on-
screen, the projector has detected that the lamp is approaching
its end of life. (Refer to page 29) It will show you a warning
message
When you see this message, change the lamp as soon as
possible. Make sure the projector has been cooled down for at
least 60 minutes before changing the lamp.
Appendices
63 ... English