Appendices
Power Indicator
Indicator Condition
Off
Blinking light
Blue
Steady light
Blue
Orange
Red
Status Indicator
Indicator Condition
Off
Red
Blinking light
Green
Steady light
Green
Orange
Lamp Indicator
Indicator Condition
Off
Blinking light
Red
Steady light
Red
Green
English ...
58
Problem: LED lighting message
Projector Condition
The main power is off
0.5 sec On,
The projector is getting ready to turn on.
0.5 sec Off
2.5 sec On,
Off Timer is enabled.
0.5 sec Off
The projector is turned on.
"Normal" is selected for "Standby Mode"
"Power-Saving" is selected for "Standby Mode"
Projector Condition
Normal or Standby ("Power-Saving" for "Standby
Mode")
2 cycle (0.5 sec
Temperature error
On, 0.5 sec Off)
3 cycle (0.5 sec
Power error
On, 0.5 sec Off)
4 cycle (0.5 sec
Fan error
On, 0.5 sec Off)
6 cycle (0.5 sec
Lamp error
On, 0.5 sec Off)
The projector is cooling down
Standby ("Normal" for "Standby Mode")
CONTROL PANEL LOCK is on.
Projector Condition
Normal
Lamp has reached its end of life. Lamp replace-
ment message will be displayed.
Lamp has reached its end of life. The projector will
not turn on until the lamp is replaced.
"ECO Mode" is set to "ECO"
Note
--
Wait for a moment.
--
--
--
--
Note
--
The projector is overheated. Move the projector to a
cooler location.
Power unit is not working properly. Contact your dealer.
Fans will not work correctly.
Lamp fails to light. Wait a full minute and then turn
on again.
Wait for a moment.
--
You have pressed cabinet button when Control Panel
Lock is on.
Note
--
Replace the lamp.
Wait for a moment.
--