If no button operation
is made for 30 seconds,
the OSD will be closed
automatically.
On Screen Display
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of set-
tings.
How to operate
1.
To open the OSD, press the MENU button on the Remote Control.
2.
When OSD is displayed, use the
in the main menu. While making a selection on a particular page,
press the
button to enter sub menu.
3.
Use the
buttons to select the desired item in the sub menu
and adjust the settings by using the
4.
Select the desired item in the sub menu and press the ENTER
button to enter another sub menu. Press the MENU button to close
the sub menu after adjustment.
5.
After adjusting the settings, press the MENU or EXIT button go
back to the main menu.
6. To exit, press the MENU button again. The OSD will be closed and
the projector will automatically save the new settings.
Sub Menu
User Controls
buttons to select any item
or
Main Menu
Setting
button.
33
... English