Enter Remote Mode Command " Esc - Epson PM-7000C Programming Manual

6.16 Enter Remote Mode Command " ESC (R "
Format:
ASCII ESC
Hex
Dec
Function:
- This command is used to enter Remote Mode from ESC/P or ESC/P 2 mode.
- Exits current printer controls language and enters Remote Mode. This mode is
maintained until the Exit Remote Mode command "ESC 00 00 00" is accepted
by the printer.
Note:
- This command is only valid in text mode.
- If the printer buffer contains data prior to entering Remote mode, the data will
be printed prior to entering Remote Mode.
- Once in Remote Mode, the printer does not accept ESC/P 2 commands.
EPSON Imaging Technology Center
Revision: 1 (Date: 6/20/00)
( R
1B 28 52
27 40 82
08H 00H 00H
08 00 00
08 00 00
REMOTE1
52 45 4D 4F 54 45 31
82 69 77 79 84 69 49
Page: 41