Table of Contents
Advertisement
6.11
Set Relative Vertical Print Position "ESC (v nL nH m1 m2 m3 m4"
Format:
ASCII
Hex
Decimal
Range of Definition:
nL=04H,
0
(m4x256x256x256 +m3x256x256 + m2x256 + m1))x(Relative vertical
position setting units) inch
Function:
- The printing position in the Y direction is set to a position spaced in the positive
direction from the present Y printing position by (m4x256x256x256 +
m3x256x256 + m2x256 + m1) x (relative vertical position setting units) inches.
- The setting in the negative direction is ignored.
- If the printing position in the Y direction has been set by this command to a
non-printable region, then the position management coordinate system is set to
the next page, and the printing position in the Y direction is reset to the origin
upon the Y-axis of the new position management coordinate system. If the
printing position in the Y direction has been set by this command to a page
other than the current page, then the position management coordinate system is
shifted to the printable region upon that page, and the following position
management is performed upon the new position management coordinate
system.
- This command is only effective in graphics mode.
Initial State:
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
None
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
The relative vertical position setting units are set by the ESC (U command.
The non-printable region is set by the ESC (c commands.
The relative vertical position setting units, the non-printable region, and the
printing position in the Y direction are reset to their initial states by the
ESC @ and ESC (G commands.
EPSON Imaging Technology Center
Revision: 1 (Date: 6/20/00)
ESC
(
v
1B
28
76
27
40
118
nH=00H
-
nL
nH
nL
nH
nL
nH
1FFFFFFFH/1440 inch
m1
m2
m3
m1
m2
m3
m1
m2
m3
Page: 35
m4
m4
m4
Advertisement
Table of Contents
