Select Dot Size "Esc - Epson PM-7000C Programming Manual

6.6 Select Dot Size "ESC ( e nL nH m d"
Format:
ASCII
Hex
Decimal
Range of Definition:
nL = 02H,
m = 00H, d = 00H, 01H, 02H, 03H, 04H
Function:
- The value of d specifies the Dot Size.
00H:
01H: dot size 1
02H: dot size 2
03H: dot size 3
* Dot selection Normal (Single or Double) is performed automatically
depending upon the chosen resolution.
- Dot control is effective regardless of the printing mode and printing density.
- If the dot size is changed in the middle of the page, the operation is not
guaranteed.
- m is the parameter to extend functions, it is fixed with 0.
- If n has a value not specified above, this command is ignored.
Initial State:
Related Commands:
Commands related in the direction of applying an effect (Setting)
Commands related in the direction of receiving an effect (Setting)
Commands related in the direction of applying an effect (Operation)
Commands related in the direction of receiving an effect (Operation)
EPSON Imaging Technology Center
Revision: 1 (Date: 6/20/00)
ESC (
1B 28
27 40
nH= 00H
d
Default
None
The default is specified by the ESC @ command.
The default is specified by the ESC (G command.
None
None
e nL nH
65 02 00
101 02 00
Dot Size
Default*
Micro dot
Normal dot (Single)
Normal x 2 (Double)
m d
m d
m d
Page: 28