Intergraph InterRAID-12 Hardware User's Manual page 93

78
3. From the Options menu, select Add/Remove SCSI Adapters.
4. Select the MegaRAID driver; then, select Remove.
5. Select OK at the Warning dialog; then, select OK again.
6. At the Warning dialog, select Add; then, select OK. Windows NT Setup displays a list
of adapters.
7. Scroll to OTHER (Requires disk from a hardware manufacturer).
8. Insert the diskette containing MegaRAID NT driver into the floppy disk drive, and
select OK. The Select OEM Option dialog displays with the MegaRAID adapter
highlighted.
9. Select OK. Setup displays the Select SCSI Adapter Option dialog.
10. Select Install. Setup displays a message that the driver is already present on the system.
11. Select New; then, select Continue at the prompt to specify the path to the adapter files.
12. At the SCSI Adapter Menu, select Close.
13. From the Options menu, select Exit.
14. Reboot the system.
To install the updated MegaRAID driver for use with Windows NT 4.00:
1. Boot the system and log in as administrator.
2. Open Control Panel.
3. Select SCSI Adapters icon.
4. Click the Drivers tab.
5. Select the MegaRAID driver.
6. Click Remove to remove the old driver.
7. Click the Drivers tab again.
8. Click Add.
9. Click Have Disk.
10. Follow the instruction on the screen to install the updated driver. This will create a
MegaRAID Program Group and a MegaRAID Power Console Program item.
11. Remove the diskette containing the MegaRAID driver from the disk drive.
12. Reboot the system.