Vertical TeleVantage 7.5 Install Manual page 90

3.
4.
Go to the next section.
Configuring boards for use outside of North America or Japan
If you are located in North America or Japan, go to "Board-specific configuration tasks" on
page 7-19.
If you are located outside North America and Japan, you must configure all your Intel Dialogic
boards to use the a-law audio format.
Important:
use the Intel MEA Configuration program to specify the a-law format for DSIx boards.
To specify a-law format for all boards except DSIx boards
1.
2.
3.
4.
7-18
Select the parameter
Derive Primary Clock From (User Defined)
value from the
FrontEnd_x
connected to the telephone company. For example, if the first span is the one that is
connected, select
FrontEnd_1
Click .
OK
You use DCM to specify the a-law format for all boards except for DSIx boards. You
In the DCM main dialog box, under
Select
Media Type (User Defined)
Select from the
ALaw
Click .
OK
Note:
During the TeleVantage Server installation, which is described in Chapter 9 in
Installing TeleVantage, you will choose your voice files format and your country.
drop-down list that corresponds to the span that is
Value
.
TDM Bus,
from the list.
drop-down list.
Value
I
NSTALLING
and then select a
double click .
Bus-0
I T
NTEL ELEPHONY
C
OMPONENTS