To assign board IDs
1.
2.
When you have set your board IDs, go to the next section.
C
6. I
HAPTER
NSTALLING
Locate the switch or switches on the side of each board.
Set the board ID:
Q Intel Dialogic trunk boards, Internet telephony boards, voice resource boards,
and conference bridge boards.
rotary switch to one of the 16 available settings (0-F).
Q MSI/x station boards.
using the two switches on the board:
Q
To set board IDs 0-15, set the SW2 switch to OFF and dial the SW1 rotary
switch to one of the sixteen settings from 0-F.
Q
To set board IDs 16-31, set SW2 to ON and dial the SW1 rotary switch to one
of the sixteen settings from 0-F.
The ON and OFF positions of the SW2 switch are indicated by silk-screened letters on
the board.
I
D
B
NTEL
IALOGIC
Set the board ID by dialing the single SW100
Set the board ID to one of the 32 available settings (0-31)
OARDS
6-5