Table of Contents
Advertisement
Verifying that Intel Dialogic is using a free IRQ and base memory
address
The Intel Dialogic driver installation automatically assigns an IRQ and base memory address for
the boards, but in some cases its choices may conflict with an existing IRQ or base memory
address assignment.
1.
2.
3.
7-16
In DCM, click
Configured Devices
.
Configure Device
Click the System tab.
The
parameter contains the IRQ assigned to Intel Dialogic. To verify
BLTInterrupt
that this is a free IRQ, click
. In the System Information dialog box, double-click
System Information
, and then double-click
Resources
Do one of the following:
Q
If the IRQ assigned to Intel Dialogic is not listed, you do not need to change it. Go
to the next step.
Q
If the IRQ assigned to Intel Dialogic is listed, make a note of one that is not. Close
the screen. In DCM change the
Click
.
OK
Important:
Windows assigns IRQs to PCI boards at startup, so they cannot be
changed in DCM. Any IRQ change you make here will not be applied to PCI boards. If
you have PCI boards, you need to work around existing IRQ assignments.
in the main dialog box and then choose
Start > Programs > Accessories > System Tools >
.
IRQs
of the
Value
BLTInterrupt
I
I
NSTALLING
parameter to a free IRQ.
T
C
NTEL
ELEPHONY
OMPONENTS
Action >
Hardware
Advertisement
Table of Contents
Troubleshooting
