Table of Contents
Advertisement
Enable Access Logging Sets access logging on or off. Default = off. The log files are
Log Cycle Time
Log File Directory
Cycle Log File
Extended Logging
Properties
Logger Timeout Values The timeout values (default two hours for stored content, four
Extended Logging Properties
Use the following window to specify which fields are logged. If you are using EtherneTV
Reporter, all fields must be selected. The items in parentheses (e.g.
the header field shown in the actual log file (see Figure 15 below). The fields are self-
explanatory and most are standard W3C fields. (See http://www.w3.org/TR/WD-
logfile.html for more about W3C log file formats.) Note that the fields used in each log will
vary slightly and unused fields are marked with a hyphen "-". Note that the following non-
standard fields may be incompatible with some reporting tools and can be de-selected:
,
x-address
x-port
other fields.
74
saved in
Program Files\VBrick\MCS\Logs
New log files can be created daily, weekly, or when the file reaches
a certain size. Old files are never deleted or written over.
Specifies where the log files are saved. This can be on the same
machine as the Portal Server or on a different machine in the
same network.
Click
Cycle Now
See Extended Logging Properties below. Determines what fields
are logged.
hours for live content) are typically used when a client machine
crashes or hangs.
, and
. For best results with log analysis tools, do not de-select any
x-duration
.
to close the existing log files and create new files.
) refer to
cs-username
© 2009 VBrick Systems, Inc.
Advertisement
Table of Contents
