Set The Tv Display Format - VBrick ETHERNETV V4.4.3 Admin Manual

Set the TV Display Format

As noted, you can change the
tables show the output from normal and widescreen TVs depending on how the
is set. Be sure to power cycle the STB to implement any changes you make.
Format
Table 18. Video Output with a Normal (4:3) TV
TV Display Format
Standard (4:3) Mode
Letterbox Mode
Widescreen TV
Table 19. Video Output with a Widescreen (16:9) TV
TV Display Format
Widescreen TV
ETV Portal Server Admin Guide
from the
TV Display Format
Video Output
Normal (4:3) video plays normally and 16:9 video has the left and
right sides cropped off (center cutout).
Normal (4:3) video plays normally and 16:9 video has all the
picture viewable with black bars on the top and bottom
(letterbox).
Normal (4:3) video plays normally and 16:9 video displays all the
picture but it is squashed in.
Video Output
16:9 video plays normally and 4:3 video has black bars left and
right (pillar box). This relies on the TV responding to aspect ratio
switching signals on VBI line 23 (PAL only). On TVs that don't
respond to this signal, you must set the TV aspect ratio manually
to avoid a stretched or squashed picture.
Amino Set Top Box
menu. The following
Preferences
TV Display
173