Table of Contents
Advertisement
Allow Content Publishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Allow Content Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Default Content Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Allow VBrick Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
IPR Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Schedule Privileges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Priority Alert Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Copyright Restrictions & Expiration Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Content Edit Permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Add/Modify User Information
To add or modify users, select
User
Username
Password
IPR Pin
First Name
Last Name
E-mail address
Location
Assigning Privileges to Users
There are three ways to assign privileges to users:
•
Assign the User to a User Group that has privileges assigned to it.
•
Assign the User to a Resource Group that has privileges assigned to it.
ETV Portal Server Admin Guide
from the navigation bar on the left.
Users
• User – Use this option if the EtherneTV system will be accessed by
a PC or Mac user, or if Users will be authenticated to IPRs via PIN
numbers. This access is not limited to a specific PC or IPR.
• IP Receiver – Use this option if the EtherneTV system will be
accessed via a IPR attached to a television or other video display. If
IP Receiver is selected, then the privilege to the system will be on a
per IPR basis. The authentication will take place automatically, so
no end user interaction is required. When choosing IPR, the IPR's
host name or IP address must be entered, as well as an optional
location/description of the IPR.
To authenticate using an LDAP database, the user name must match
exactly what is in the LDAP database (the Portal Server is case
sensitive). A new user can also be assigned (if using the VBrick
database option) that does not exist in the LDAP database.
For LDAP authentication a password is not needed (the user will use
their normal network login password). If using the VBrick database a
password must be entered (passwords are case sensitive). Passwords
cannot exceed 31 characters.
Optional. A PIN number can be assigned to a user that allows them to
access their content from any IPR, regardless of the IPR's privilege
level. This works well when an IPR is going to be a shared resource.
Note: IPR PIN access is dependent on VBrick Database being
enabled.
Optional. User first name.
Optional. User last name.
Optional. User e-mail address.
Optional. User location.
Users and User Groups
113
Advertisement
Table of Contents
