Table of Contents
Advertisement
e.
Allow
Read
f.
Click
Finish
4. In the Portal Server, configure the publishing point
match the values you used for the publishing point on the Windows Media server.
Note • The publishing point name within a server must be unique. You cannot add a
publishing point that already exists in MCS database.
• The publishing point FTP directory within a server must be unique.
• If free space information is available at the time a publishing point is added, it must
be greater than the entered
• Publishing points located within another publishing point are not supported
although publishing points on the same drive are supported. For example, two
publishing points with
publishing points with
Add FTP Server
Figure 6. Add FTP Server
Using Secure FTP
In Portal Server v4.2 or higher, VBrick's FTP client supports secure FTP connections from
the end user (client), Portal Server and NVR to the VOD servers. This is accomplished using
FTP over SSL (FTPS protocol). Having a client that supports FTPS however, is not enough
to have secure FTP connections throughout the system. The FTP servers on all VOD servers
also need to support FTPS for a secure connection to exist. If a secure connection cannot be
established, the client will revert to the standard FTP protocol. The FTP server on Windows
platforms (IIS) does not currently support FTPS. Therefore, to have secure connections, you must
install a third-party add-in on all Windows VOD servers. Of the various solutions available,
VBrick recommends FTP Guardian. FTP Guardian is a wrapper for IIS that serves as a proxy
between a secure client and an unsecured IIS. You change the FTP port of IIS to an arbitrary
ETV Portal Server Admin Guide
and
permissions and click Next.
Write
when done.
Low Space Threshold
c:\pub1
Source
c:\pub1
Source
,
, and
Name
Source
.
and
are supported but two
c:\pub2
and
are not supported.
c:\pub1\pub2
Global Settings
to
FTP Directory
37
Advertisement
Table of Contents
