Reset Database Backup Versioning; Enable The Warm Backup Server - VBrick ETHERNETV V4.4.3 Admin Manual

4. Press and
OK

4. Reset Database Backup Versioning

This step is important. Do not omit this step.
To reset database backup versioning:
1. Right-click on
2. Then go to
Copy/Delete > Versioning
to .
7
3. Click and minimize the application—do not exit.
OK

5. Enable the Warm Backup Server

If you purchased ETV Backup, two Portal Servers will be present at your site—one of which
must be configured as a warm backup. By default, the warm backup option is disabled on both
servers.
To enable a warm backup server:
1. On the server machine that will be used as the warm backup, go to
> Add or Remove Programs > VBrick Media Control Server Suite
2. Click
Change/Remove
Backup Server
ETV Portal Server Admin Guide
and minimize the application—do not exit.
OK
and select
MCS Database Backup
and set maximum versions to
and on the following window. Then select
and click .
Next
EtherneTV Backup
.
Modify
and maximum days
5
Start > Control Panel
.
Enable/Disable Warm
163