Table of Contents
Advertisement
3. Complete the fields in
newly configured recorder to the previous window. If necessary see Synchronizing the
Portal Server and the NVR below.
Recorder Server
Record Path
Max. Recording
FTP User Name
FTP Password
Confirm Password FTP password in operating system of Recorder server.
Domain Name
User Name
User Password
Synchronizing the Portal Server and the NVR
The internal clocks on the Portal Server and the NVR must be synchronized for recording
functionality to work properly. You can use the
58
Recorder Configuration
IP address or host name of recorder server. Defaults to localhost if
recorder server is on the same machine as ETV Portal Server.
Path and folder where all recording are stored. By default, recordings
are stored on the D: drive. If you install ETV Portal Server on a
system without a D: drive, you must change the path. Also, in order to
record multiple streams, the Record Path must be under FTP root. For
example, if root is
C:\Inetpub\ftproot
C:\Inetpub\ftproot\<your_folder>
The default number of concurrent recording sessions allowed is 2. If
you exceed 2, you must purchase a Network Video Recorder. Without
an NVR, any attempt to record more than 2 concurrent sessions will
fail.
FTP user name in operating system of Recorder server.
FTP password in operating system of Recorder server.
This field is required only if the Recorder server is not on the local network.
Enter the domain name if the Record Path above points to a server in
a different domain,
The user name who has access to the specified path.
The corresponding password for this user name.
window and click
Submit
the Record Path must be
command as explained below or you
Net time
© 2009 VBrick Systems, Inc.
. This adds the
Advertisement
Table of Contents
