Advanced Settings - VBrick ETHERNETV V4.4.3 Admin Manual

Portal server
Table of Contents

Advertisement

Progressive Download
Server
Allow Content Publishing All WM recordings will be published to the VOD servers and to

Advanced Settings

Advanced settings are enabled if you select a VBrick encoder or a VBStar. Note that the Portal
Server will attempt to retrieve and autofill the Multicast IP addresses and Port numbers. You can
modify these fields as necessary.
Note The following values are stored in the Portal Server database only. Depending on how
a scheduled event is configured, they may be saved and written back to the VBrick
device after the scheduled event runs.
Multicast IP
Video Port
Audio Port
CC Port
46
Check this box to enable a WM encoder (with v4.2.1 or higher
software) with a hard drive (a VBStar) as a progressive
download server. All .wmv files stored in the
of the VBStar will be available in the Asset Library for
progressive download. (You can also use a file server for
progressive download. See Add File Server on page 39.)
this VBStar if the user has access rights and publishing
permissions. Note that ingestions to the VBStar will fail when
the 60 GB hard drive is full.
Destination multicast IP address.
Destination video port.
MPEG-4 devices only. Destination audio port.
MPEG-4 devices only. Closed captioning port.
folder
D:\public
© 2009 VBrick Systems, Inc.

Advertisement

Table of Contents
loading

Related Products for VBrick ETHERNETV V4.4.3

Table of Contents