Table of Contents
Advertisement
Windows Media and Darwin servers require no additional configuration.) Use the following
steps to configure a VOD-W server to work with ACNS.
To configure a VOD-W server to work with ACNS:
1. Login the VOD-W server.
2. Go to
Start > Windows Explorer
3. Expand the tree in the left pane under the drive labeled
4. Expand
Program Files
5. Click on
QuickVideo OnDemand Server
6. Double-click on the file
7. Locate the line that reads "
8. Locate the lines beginning with
a number. Leave the Notepad window open.
9. Go to
Start > Administrative Tools > Internet Information Services (IIS) Manager.
10. Expand the tree in the left pane and expand
11. For each
StoragePath
a.
Right-click on the
b. Click
Next
c.
For
Virtual Directory Alias
StoragePath
StoragePath1=D:\Content
d. For
FTP Site Content Directory
the
StoragePath
e.
In the
Access Permissions
.
Read
f.
Click
Finish
12. You will also need to configure the VOD-W Server to allow anonymous connections.
To allow anonymous connections:
1. Go to
Start > Administrative Tools > Internet Information Services (IIS) Manager.
2. Expand the tree in the left pane and expand
3. Right-click on the
4. Go to the
Security Accounts
Portal Server Configuration
Portal Server integration with Cisco's ACNS Server is available with Portal Server v4.0.1 or
later software. The following procedures explain (1) how to configure a manifest file on the
Portal Server that will be used by the ACNS server to ensure that the content on the ACNS
Server matches the content on the Portal Server; and (2) how to verify that forced use of
TCP for MPEG-4 content is disabled.
To create a manifest file on the Portal Server:
1. Install MCS v4.0.1 or later from the EtherneTV Product CD See the ETV Portal Server
Release Notes for detailed instructions.
2. After installing the Portal Server, open the Portal Server Admin Console and go to
Global Settings > Global Assignments > Set Cisco ACNS Manifest Options
176
.
under C: and then expand
.
. The system should use Notepad to open the file.
QvcsConfig.ini
".
[Ingest]
StoragePathN=
line found in step 8, configure a virtual directory for it as follows:
and then select
Default FTP Site
in the Welcome to the Wizard window.
, enter the text after the first backslash (\) from the
line whose data is being setup. For example, if the line reads
, enter
Content
, click
line whose data is being setup. Click
window, click
to complete creation of the new Virtual Directory.
and select
Default FTP Site
tab, check
.
(C:)
under that.
InfoValue
shortly after the "
[Ingest]
.
FTP Sites
New > Virtual Directory
for the
. Click
Alias
and navigate to the directory specified in
Browse
then
OK
to select the default permission of
Next
.
FTP Sites
.
Properties
Allow Anonymous Connections
© 2009 VBrick Systems, Inc.
" line where N is
.
.
Next
.
Next
, and click
.
OK
.
Advertisement
Table of Contents
