Startup/Shutdown Screen; If The Card Is Not Recognized (Card Check) - Olympus CAMEDIA C-5060 wide zoom Reference Manual

Turning the power on/off
Startup/Shutdown screen
You can select a picture and sound so that when
the power is turned on/off, a startup/shutdown
image is displayed on the monitor and the
startup/shutdown sound is played (P 188) You
can register a picture for the startup/shutdown
screen (P. 189) and adjust the volume of the
sound (P.187).
Startup/Shutdown screen (Factory default setting)
¢)
If the card is not recognized (card check)
When the power is turned on, the camera checks the card automatically If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed, o.
Monitor
Control panel indication Corrective action
m
NO CARD
There is no card in the camera or the card is
not inserted properly.
Insert a card. If a card is already inserted,
remove it and insert it again correctly.
The card cannot record, play back or erase
3ictures.
Replace the card. with a new one or format
the card.
Press _:_@ to select POWER OFF, then
press Q. Replace the card with a new
one.
Format the card.
Press _@ to select _ FORMAT, then
press Q to display the confirmation
screen. Select YES and press @.
Formatting starts, if the card was
successfully formatted, the camera is
ready to take pictures.
-f:-_
• Atl data stored on the card is erased when the card is formatted
Note