Olympus CAMEDIA C-5060 wide zoom Reference Manual page 111

Sequential shooting
3 Select the number of pictures. Press @_ to select x3 or
x5, then press @.
• In some combinations of picture size and record mode, only x3 is
available
• Press @ repeatedly until the menu disappears
4
Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing
the shutter button.
<
(3
o
t.Q
Note
Sequential shooting (HI[:@], E_], AFE_, BKT) is not possible in
the following situations:
• When the record mode is set to TIFF
• When NOISE REDUCTION is set to ON
E_] and AFE_ are not available when the record mode is set to
RAW.
In sequential shooting mode (HI_, O, AFi:::_ 3 , BKT), the buitt-
in flash does not fire. The external flash does not fire in BKT mode.
Auto bracket shooting is not available in M mode.
Since the shutter speed is set to 1/30 sec max. except in S and M
mode, exposure is decreased when shooting a dark subject to
prevent camera movement.
For auto bracketing in modes other than S mode, shooting is
automatically set to 1/30 sec if the shutter speed was other than
1/30 sec. for an exposure differential of O.
If the battery power is low and the battery check bIinks during
sequential shooting, shooting stops and the camera starts saving
the pictures you have taken. Whether or not alt of the shots are
saved depends on how much battery power remains.
In Auto bracket shooting, if available space on the card does not
exceed the number of set pictures, the next picture may not be
taken
110