Turning The Power On/Off - Olympus CAMEDIA C-5060 wide zoom Reference Manual

Turning the power on/off
3
Turn the mode dial until the mode
you want to use is aligned with the
red line.
I£_"Shooting mode" (P59)
I!
4
Turn the power switch so that ON
is aligned with the • mark,
• When tile mode dial is set to a mode
e other than t-_q, the camera turns on in the
shooting mode. The monitor turns on and
=
the lens extends
• When the mode dial is set to t-_-t, the
camera turns ell in the playback mode
• and the monitor turns on.
Q" • You can also change the mode with the
camera turned on.
Power
switch
• Power off
1
To turn the power off, turn the power switch
so that OFF is aligned with the • mark.
• The monitor turns off, the lens retracts and the power
turns off
2
Turn the monitor towards the camera and
close it.
• To protect tile monitor, you are recommended to
keep it cIosedwhen the camera is not in use
TIPS= = = = = = = = = = = = = == = = = = = = = = = = = = = = == = =
• To reduce battery consumption, the camera automaticalIy enters
the sIeep mode after about 3 minutes of non-operation The
camera activates again as soon as you touch the shutter button or
zoom lever.
• To reduce battery consumption, the camera turns off automatically
and the lens retracts after about 4 hours of non-operation. To
resume operation, turn the camera on again
|, • If the camera is subjected to strong vibration or impact while it is
_!} turned on, it may turn off momentarily and the date and other
Note settings return to the factory default settings
34