Olympus CAMEDIA C-5060 wide zoom Reference Manual page 87

_o
o
o
I.Q
[ Mode dial }_c:_3rA--_
I Turn the control dial to set the
aperture value.
Turn to the right Turn to the left
to decrease the to increase the
aperture value _ aperture vatue
(F number). (F number).
Control dial
• You can change the adjustment range for the
aperture. 1_4_'"Exposure steps - Selecting
the adjustment increments" (P 174)
• When the shutter button is pressed halfway, the shutter speed is
displayed on the controt panel
• If the image is underexposed or overexposed when the shutter button
is halfway pressed, the shutter speed indication blinks.
Control Mtan!ng ...............................
I Lights The aperture setting is
-i n -io suitable for the conditions.
*' I \ Blinks The aperture setting is
_ _ unsuitable for the conditions.
H 3_ _ Take the following steps when
e - J _ r is turned on.
A appears: The image is overexposed, v appears: The image is underexposed.
Turn the control dial to the right to Turn the control dial to the left to reduce
increase the aperture value, the aperture value.
Aperture range: Toward W: f2.8 to f8.0, Toward T: f4.8 to f8.0
_,_X_= * When the flash is set to the auto-flash mode or the fitl-in flash
mode, the shutter speed is fixed at 1/30 sec in the maximum wide
Note angle, or 1/100 sec in the maximum teIephoto, and will not go
slower.
86