Changing The Startup Screen And Shutdown Screen; Screen Setup - Olympus SP-500 Advanced Manual

Changing the startup screen and shutdown
screen (PW ON SETUP/PW OFF SETUP)
You can select the picture displayed and the sound played when the
camera is turned on and turned off. You can also register your favorite
picture and display it on the screen. g"Screen setup" (P. 105)
Top menu [MODE MENU]
[PW OFF SETUP]
1
For [SCREEN], select [OFF], [1],
or [2], and press Z.
OFF No picture is displayed.
1 A picture is displayed.
2 The picture registered with
[SCREEN SETUP] is displayed.
If there is no registered picture,
nothing is displayed.
2
For [SOUND], select [OFF], [1], or
[2], and press Z.
OFF No sound.
1/2 Sound is output.
• The volume level is the same as that set
with [VOLUME].
g"Setting camera sounds (8/BEEP/
SHUTTER SOUND/VOLUME)" (P. 107)
3
Press Z.
Note
• If [SCREEN] is set to [OFF], [SOUND] cannot be set.

Screen setup

You can select the pictures that are displayed when the power is turned on and
turned off. Still pictures in the internal memory or the card can be registered. Use
[PW ON SETUP] or [PW OFF SETUP] to display the screen you registered.
g"Changing the startup screen and shutdown screen (PW ON SETUP/PW OFF
SETUP)" (P. 105)
[SETUP] [PW ON SETUP] /
g"Using the menus" (P. 17)
PW ON SETUP
SCREEN
OFF
SOUND 1
2
OK
SELECT GO
PW ON SETUP
SCREEN
SOUND OFF
1
2
SELECT GO OK
105
7