1
Pass the lens cap string through the
hole in the lens cap, then pass the other
end through the loop and pull tight.
2
Pull the ends of the strap out of the
stopper and ring.
Thread the strap (_)
through the
string loop (attached to the lens cap in
Step 1). Then thread it through the strap
eyelet on the camera.
4
Thread the end of the strap back
through the ring as indicated by the
arrow. Adjust the strap to the desired
length.
5
Thread the end of the strap back
through the stopper as indicated by the
arrow. Pull the strap (_)
tight and make
sure it is fastened securely.
6
Attach the strap to the other eyelet
following Steps 3 to 5.
_
• Be careful with the strap when you carry the camera, as it can
easily catch on stray objects,
causing injury or damage
Note
° Attach the strap correctly
as described i_ the above steps so that
the camera does not fall off If the strap is attached incorrectly
and
the camera fails off, Olympus
is not responsible
for any damages
23j