Screen Setup - Setting Up An Image For The Startup/Shutdown Screen - Olympus Camedia AZ-2 ZOOM Advanced Manual

SCREEN SETUP — Setting up an image for the startup/shutdown screen
Allows you to use one of your own images stored on the card for the
startup/shutdown screen that appears every time the camera is turned on/off. To
display your new startup/shutdown screen, change the PW ON SETUP/PW OFF
SETUP setting.
~
"PW ON SETUP/PW OFF SETUP — Power on/off display/sound setting"
(P. 85)
PW ON : To set up an image for startup screen.
PW OFF : To set up an image for shutdown screen.
Available modes
In the top menu, select MODE MENU
T SETUP T SCREEN SETUP.
~
"How to use the menus"(P. 17)
Select PW ON or PW OFF.
EXIT
EXIT
SCREEN SETUP
PW ON
PW OFF
SELECT GO OK
SCREEN SETUP
IMAGE EXISTING
RESET
KEEP
SELECT GO
OK
Joystick
This screen appears if an image
has already been set for the
startup/shutdown screen. To replace
the image with a new one, select
RESET. If KEEP is selected, the
PW ON (PW OFF) setting screen
reappears.
6
87