Olympus CAMEDIA C-5060 wide zoom Reference Manual page 231

=
t_
o
Troubleshooting
The picture is too dark.
The flash was Hold the camera correcfly, keeping your fingers P.41
blocked by your away from the flash
finger
The subject was out Shoot within the flash working range P.75
of the working range
of the flash
The flash was set to Select a flash mode other than flash off. P.74
the flash off mode
The subject was too Set the flash to fll]dn mode, or use the spot P74. 97
sma{I and was metering mode.
back]it.
The sequential Higher shutter speeds are used when the P.108
shooting mode was sequential shooting mode is selected, which may
used. result in pictures that are darker than usual
Select rq in the DRIVE menu.
The center of the If the center of the subject is too bright, the image P.126
subject is too bright, as a whole emerges darker Adjust the exposure
compensation toward plus (+).
The aperture value Decrease the aperture value or set the camera to P.86
setflng is toolowin A P mode.
(M) mode.
The shutter speed Decrease the shutter speed or set the camera to P.87
setting is too fast in S P mode.
(M) mode.
The colors of pictures look unnatural
indoor lighting can Set the white balance according to the lighting. P.128
affect the picture's
colors.
No white in the include something white in the picture, or shoot P.74
picture, using the fill-in flash mode
The white balance Adjust the white balance according to the light P.128
setting is wrong source
Filter was used. The image may be discolored according to the P.128
filter used Use the one-touch white balance
function.
230