How To Connect Your Vcr - Pro-Form CROSSWALK ADVANCED 525s User Manual

HOW TO CONNECT YOUR VCR
Note: if your VCR has an unused AUDIO OUT jack,
see instruction A below, if the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a buHtqn VCR, see instruction B. If your VCR
is connected to your home stereo, see NOW TO
CONNECT YOUR HOME STEREO on page 17.
A, Hug one end of the audio came into the jack be-
neath the console, Hug the other end of the cable
into the included adapter, Hug the adapter into the
AUDIO OUT jack on your VCR,
A_DIO OUT
i/i/' / Adapt'er'_"
Audio
i Cable
B, Hug one end of the audio cable into the jack be-
neath the console, Hug the other end of the cable
into the included adapter, Hug the adapter into an
RCA Y-adapter (available at electronics stores),
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the Y-adapter, Hug the
Y-adapter into the AUDIO OUT jack on your VCR,
RCA Y-adapter--.
Audio
Cable Adapter
Wire removed from_
AUDIO OUT jack
18