Page 1
Model No. DRTL59420 USER'S MANUAL Serial No. Serial Number Decal QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete sat- isfaction through direct assis- tance from our factory. TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLL- FREE CUSTOMER HOT LINE.
Page 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 BEFORE YOU BEGIN .
Page 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions.
Page 4
22. When using iFIT.com CDs and videos, an 25. Inspect and properly tighten all parts of the electronic “chirping” sound will alert you treadmill regularly. when the speed and/or incline of the treadmill is about to change. Always listen for the 26.
Page 5
The model number of the treadmill is home. And when you’re not exercising, the unique DRTL59420. The serial number can be found on a CROSSWALK ADVANCED 525x can be folded up, re- decal attached to the treadmill (see the front cover of quiring less than half the floor space of other treadmills.
Page 6
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area, and remove all packing materials except for the plastic ties around the upper body arms. Do not dispose of the packing materials until assembly is com- pleted. Assembly requires your own Phillips screwdriver and rubber mallet Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
Page 7
3. With the help of a second person, carefully tip the Uprights (64) back to the vertical position. Attach the Latch Assembly (32) to the left Upright (64) with two Latch Screws (115). Note: The two Latch Screws may be in the Left Upright (64). 4.
Page 8
OPERATION AND ADJUSTMENT THE PERFORMANT LUBE WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with and plug the surge suppressor into an appropriate PERFORMANT LUBE , a high-performance lubricant.
Page 9
CONSOLE DIAGRAM Manual/Program Indicators Display Program Display Display Program Profiles Note: If there is a thin sheet of plastic Clip on the face of the console, remove it. The console also features new iFIT.com interactive CAUTION: technology. IFIT.com technology is like having a per- Before operating the sonal trainer right in your home.
Page 10
HOW TO TURN ON THE POWER the Quick Speed buttons. Note: The console can display speed and distance in either miles or kilometers. For simplicity, all instructions in Plug in the power cord (see page 8). Make sure this section refer to miles. that the circuit breaker is in the reset position (see page 24).
Need help?
Do you have a question about the DRTL59420 and is the answer not in the manual?
Questions and answers