List Of Error Codes Without Messages - Canon imageCLASS 2200 Reference Manual

Remove the original from the platen glass.
Cause
Remedy Remove the original from the platen glass, and place the original again.
Remove the original from the feeder.
Cause
Remedy Remove the original from the feeder.
No toner.
Cause
Remedy Add toner, using the toner cartridge recommended for use in this machine.
6

List of Error Codes Without Messages

If the job or operation does not complete correctly, check the End Code, and perform the
necessary operations according to the End Code displayed. You can check the End Code in
the Details screen under Log in the System Monitor screen. (See 'Checking Print Job
Details,' on p. 2-7.)
#99
#816
#825
6-28 List of Error Messages
The original remains on the platen glass.
The original is placed both in the feeder and on the platen glass in a specified
mode with which the feeder cannot be used.
There is not enough toner left to print.
(See 'Adding Toner,' on p. 5-9.)
Cause : Copy/print is interrupted.
Remedy : Try to copy/print again.
Cause : Print cannot be performed because the number of prints is exceed-
ing that of the Impression Limit set in the Dept. ID Management.
Remedy : Contact your system manager.
Cause : Print cannot be performed because the ID and password of the
reserved/current print job has been deleted, or the password has
been changed.
Remedy : Try again with the changed Department ID and password, or register
the new Department ID and password. If you do not know the pass-
word, contact your system manager.