Orientation Of Originals - Canon imageCLASS 2200 Reference Manual

Orientation of Originals

You can place original either vertically or horizontally. Always align the top edge of your
original with the back edge of the platen glass (top left corner) or the feeder.
1
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass, prints may not
be made correctly, depending on the mode you have set.
•
LTR and STMT-size originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than for vertically placed originals. You
can place originals horizontally when printing with Preset Zoom mode, such as when processing
LTR→11" x 17".
•
Horizontally placed LTR and STMT-size originals are referred to as LTRR and STMTR.
•
11" x 17" and LGL-size originals must be placed horizontally.
1-40 Placing Originals
[Platen glass]
Place the original
face down
Vertical placement
ABC
Place the original
face up
Vertical placement
Place the original
face down
Horizontal placement
[Feeder]
Horizontal placement
ABC
Place the original
face up